WyreStorm 4-Input 4K HDBaseT Switcher with USB | SW-510-TX

• Description
• Specifications
• Downloads

• WyreStorm 4-Input 4K HDBaseT Switcher with USB | SW-510-TX

  When the next generation of HDBaseT transmission meets WyreStorm’s presentation switcher platform, the result is this powerful switching transmitter, perfect for corporate meeting and classroom environments. Automatic switching inputs with USB host extension and CEC triggering mean an autonomous experience with no user input required.

  
  4-INPUT SWITCHING EXTENDER
  A flagship in our PRO range and a first for our switching extenders, the SW-510-TX brings a wide range of premium features into one powerful meeting space solution. Supporting USB routing to both HDMI and DP inputs, this extender accepts HDMI, DisplayPort and USB3.1c sources with a VGA +audio input for legacy devices. Additionally, the SW-510-TX adds support for 4K content and HDCP 2.2 protected content.

  
  ADDITIONAL RECEIVER INPUTS
  When the meeting room is in an idle state, the receiver can switch to either of its HDMI inputs which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. These inputs can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.

  
  CONDITION-BASED RELAYS BUILT INTO RX
  With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.

  
  USB 2.0 PASS-THROUGH
  HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. Furthermore, allowing 2 host devices to be connected, the extender can route USB traffic depending on the currently selected source at the receiver.

  In the Box
  1x SW-510-TX Transmitter
  1x 12V DC Power Supply (US/UK/EU)
  1x IR Receiver
  2x Mounting Brackets
  1x 3-pin Screw Down Phoenix Connector
  1x 4-pin Screw Down Phoenix Connector
  1x Quickstart Guide

• Category	Details
  AUDIO & VIDEO
  Inputs	1x VGA In (15-pin VGA), 1x Display Port In (DisplayPort 1.3), 1x HDMI In (19-pin type A), 1x Audio In (3.5mm TRS Stereo), 1x Line In (3.5mm TRS Stereo)
  Outputs	1x HDMI Out (19-pin type A), 1x HDBT Out (8-pin RJ-45 Female)
  Video Encoding	HDBaseT™ Class C
  Audio Formats	2ch Analog/PCM, Multichannel: LPCM
  Video Resolution (Max)	1920x1080p @60Hz 8bit, 1920x1200p @60Hz 8bit, 3840x2160p @60Hz 8bit 4:4:4, 4096x2160p @60Hz 8bit 4:2:0
  Supported Standards	DCI, RGB
  Maximum Pixel Clock	297MHz
  COMMUNICATION & CONTROL
  HDMI	HDMI, HDCP 2.2, EDID, DVI/D supported with adapter (not included)
  HDBaseT	HDMI, HDCP 2.2, EDID, CEC, 2ch audio, USB
  RS-232	1x RS-232 (Control): 3-pin Phoenix, 1x RS-232 (Passthrough): 3-pin Phoenix
  Ethernet	2x 8-pin RJ-45 female, Bidirectional over HDBaseT™
  IR	1x IR RX (3.5mm TS Mono)
  USB	1x USB-C (USB 3.1 Audio/Video), 2x USB Host (USB-B), 3x USB Device (USB-A)
  POWER
  Power Supply	12V DC 2A
  Max Power Consumption	14.02W
  Professional Features
  Switching	Automatic or manual switching between HDMI, VGA, DisplayPort, and USB-C inputs
  Bidirectional USB	USB2.0 for connection of webcams, smart touchscreens, and microphones
  USB-C Alt-mode	Supports AV and USB device connection through a single cable
  CEC Triggering	Automatic or manual CEC triggering for compatible screens or projectors
  Source Content Support	Supports up to 4K/60 4:2:0 with HDCP 2.2

• Description	Downloads
  Spec Sheet	Downloads