Ubiquiti UISP G2 Basic Access Control Reader White And Black | UA-G2
- Description
- Specifications
-
Ubiquiti UISP G2 Basic Access Control Reader White And Black
Ubiquiti UniFi Access Reader G2 (UA-G2)
The Ubiquiti UniFi Access G2 is a cutting-edge access control system that offers convenient and secure entry to your premises. With the ability to unlock using either an NFC card or the UniFi Identity mobile app, authorised individuals can easily gain access. The device boasts additional handwave unlock functionality, further enhancing accessibility.
The UniFi Access G2 features entry and exit greeting messages, allowing for personalised and informative interactions. By connecting to the UniFi Access Hub using Power over Ethernet (PoE), it ensures a seamless integration into your network infrastructure.
Its IP55 weather resistance rating enables reliable operation in a wide range of environmental conditions, spanning from -30 to 45°C.Ubiquiti UniFi UA-G2 Key Features
Unlock using an NFC card or UniFi Identity mobile app
Additional handwave unlock functionality
Entry and exit greeting messages
Connects to UniFi Access Hub using PoE
IP55 weather resistance (-30 to 45° C)UniFi Access App
The UniFi Access mobile app is a convenient, comprehensive management tool that allows you and other administrators to oversee every aspect of your access system, including connected doors, user rosters, reader devices, access cards, and security policies. With the app, you can also view real-time access event logs to maintain full vantage of visitor and employee traffic through your workplace. -
Technical Specifications Mechanical Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4″) Weight 82 g (2.9 oz) Enclosure material Polycarbonate, glass Mounting In wall, gang box Weatherproofing IP55 Hardware Networking interface (1) 10/100 MbE RJ45 port Connectivity BLE 4.1 Power method PoE Power supply UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU Supported voltage range 48V DC Max. power consumption 5W ESD/EMP protection Air: ±15kV, contact: ±8kV Sensors Proximity sensor Speaker (1) 8 ohm, 0.7W LEDs R/G/B/W Button (1) Factory-reset NFC frequency 13.56 MHz NFC read range < 30 mm NFC standards ISO 14443A, 14443B, 15693 NFC technology NFC Tag 1,2,3,4,5, MIFARE Classic, MIFARE Plus, MIFARE Ultralight, MIFARE DESFire Operating environment Outdoor use Ambient operating temperature -30 to 45° C (-22 to 113° F) Ambient operating humidity 5 to 90% noncondensing Software information The software version of a product can be checked at https://unifi.ui.com UL 294 level Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number UA-G2/UA-G2-Black, V02 LED System Steady blue: Adopted/device is ready, Steady white: Pending adoption, Blinking white/blue: Upgrading firmware, Strobing red: Emergency lockdown Software Management application: UniFi Access: Version 1.5.9 and later
