Planet 5-Port 10/100TX Industrial Fast Ethernet Switch | ISW-501T

• Description
• Specifications
• Downloads

• Planet 5-Port 10/100TX Industrial Fast Ethernet Switch | ISW-501T

  Slim Type with more Practicability and Convenience
  PLANET ISW-501T, an Industrial 5-port Fast Ethernet Switch, provides non-blocking wire-speed performance in harsh industrial environment. It also provides 5-port 10/100BASE-TX RJ45 copper interfaces delivered in an IP30 rugged, strong case with redundant power system. Its slim case is suitable for such applications as surveillance system deployments, control management and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.

  Energy Saving with Lower Power Consumption
  The ISW-501T, adopting the advanced green networking technology, provides the IEEE 802.3az protocol based power saving. This feature makes the ISW-501T consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently.

  Stable Performance under Difficult Environments
  The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC, 24V AC) for worldwide high availability applications requiring dual or backup power inputs.

  
  Robust Switch Performance
  Built in a high-performance switch architecture, the ISW-501T comes with five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps, and the 1K MAC address. Thus, the ISW-501T can transfer wire-speed packets without the risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer.

  All of the RJ45 copper interfaces in the ISW-501T support 10/100Mbps auto negotiation for optimal speed detection through RJ45 Category 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

• Category	Specification
  10/100BASE-TX Auto MDI/MDIX Ports	5
  LED Indicators	3 x LED for System and Power:
  	■ Green: DC Power 1
  	■ Green: DC Power 2
  	■ Green: Power Fault
  	1 x LED for each Copper Port
  	■ Green: 10/100 LNK/ACT
  Enclosure	IP30-rated metal case
  Dimensions (W x D x H)	135 x 87 x 32 mm
  Weight	400g
  ESD Protection	6KV DC
  EFT Protection	6KV DC
  Power Requirements	12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
  Power Consumption/Dissipation	1.6 watts/5.4BTU
  Installation	DIN rail kit and wall-mount ear
  Alarm	Provides one relay output for power failure, Alarm relay current carry ability: 3A @ DC 30V
  Connector	Removable 6-pin terminal block
  	Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
  Switch Processing Scheme	Store-and-Forward
  Address Table	1K
  Buffer Memory	Embedded 448K bits packet buffer
  Flow Control	Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
  Switch Fabric	1Gbps
  Throughput (packet per second)	0.74Mpps
  Network Cables	10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters
  	100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters
  Standards Compliance	IEEE 802.3 Ethernet
  	IEEE 802.3u Fast Ethernet
  	IEEE 802.3x Full Duplex Flow Control
  	IEEE 802.3az Energy Efficient Ethernet
  Temperature	Operating: -40~75 degrees C
  	Storage: -40~75 degrees C
  Humidity	Operating: 5% to 95%, Storage: 5% to 95% (non-condensing)
  Regulatory Compliance	FCC Part 15 Class A, CE
  Stability Testing	IEC60068-2-32 (free fall)
  	IEC60068-2-27 (shock-proof)
  	IEC60068-2-6 (vibration-proof)

• Description	Downloads
  Datasheet	Downloads