NeoMounts FPMA-DTBW100 Toolbar Mount – For Single 10-30″ Screen

• Description
• Specifications
• Warranty
• Downloads

• NeoMounts FPMA-DTBW100 Toolbar Mount

  Neomounts Tilt & Turn Monitor Mount for use with FPMA-DTB100/FPMA-DTB200/FPMA-WTB100 Toolbars – for single 10-30″ Screen – Silver
  

  The Neomounts toolbar mount, model FPMA-DTBW100 is a tilt- and rotatable mount for flat screens up to 30″. This mount is a great choice to use in combination with Neomountss’ toolbar model FPMA-DTB100, FPMA-DTB200 or FPMA-WTB100.

  Neomounts versatile tilt (180°) and rotate (270°) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. Depth 8 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy.

  FPMA-DTBW100 has one pivot point and is suitable for screens up to 30″ (76 cm). The weight capacity of this mount is 8 kg each screen. The toolbar mount is suitable for screens that meet VESA hole pattern 75×75 and 100×100 mm. Different hole patterns can be covered using Neomounts VESA adapter plates.

  By using an ergonomic mount neck- and back complaints can be avoided. Ideal for use in offices and on counters or in a reception area.

  All installation material is included with the product.

• General
  Min. screen size*	10 inch
  Max. screen size*	30 inch
  Min. weight	0 kg
  Max. weight	8 kg
  Screens	1
  VESA pattern	75×75, 100×100 mm
  VESA minimum	75×75 mm
  VESA maximum	100×100 mm

  Functionality
  Type	Tilt
  Depth adjustment	8 cm
  Tilt (degrees)	180°
  Rotate (degrees)	270°
  Adjustment type	None

  Information
  Article number	FPMA-DTBW100
  EAN	8717371445195
  Color	Grey
  Main material	Steel
  Warranty	5 year

• On Neomounts mounting solutions is a warranty term applicable of 5 years
  

  Warranty Repair: In the event that any Neomounts product becomes defective in material or workmanship during the warranty period, Neomounts will determine with you if the product defect is covered under warranty. Neomounts, at its own discretion, may replace or repair the product determined to be under warranty at a designated Neomounts location or at your location. The labor costs associated with the repair of the product may be the responsibility of Neomounts if determined to be under warranty.
  You must receive pre-approval by Neomounts for the labor costs prior to repair or replacement of warranty products. You must contact Neomounts to obtain a Return Material Authorization (RMA) number. The RMA number must be optained by filling in the RMA request form online. Performance of any repair or replacement on product under warranty does not renew or extend the warranty period.
  
  

  Non-Warranty Repair: You may return a product for repair that is not covered by warranty only if you have received a preapproved RMA number from Neomounts. Labor costs and freight charges associated with non-warranty repair will be the sole responsibility of the customer, reseller or installer. A repair fee, specific to the product, is charged for any product that is repaired outside of the warranty period. Repairs on products out of warranty also carry a 90-day warranty, effective the day that you receive the item after repair.

• Description	Downloads
  Product sheet	Downloads
  Manual	Downloads