Matrox ConvertIP DRH 2x RJ45 network port, HDMI I/O. Power Supply | CIP-DRH

• Description
• Specifications

• Matrox ConvertIP DRH 2x RJ45 network port, HDMI I/O. Power Supply | CIP-DRH

  Dual-channel RJ45 HDMI-to-IP transmitter/receiver
  Matrox ConvertIP DRH is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring HDMI I/O and three RJ45 ports on a single device, ConvertIP DRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can receive power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy. 

  Key features
  HDMI I/O
  Multi-network support  
  2x RJ45 (1G & 2.5G network support for Media and Control)  
  1x RJ45 (1G network support for independent control network)  
  Transmit or receive IP signals from a single device 
  Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications 
  Fanless design for quiet cooling 
  Zero-latency HDMI loop-out 
  Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)  
  Compact form factor mounts easily to the back of a monitor  
  Web-based user interface for managing ConvertIP devices  
  Complimentary ConvertIP Manager Windows application for simple commission and deployment
  HDCP 1.4 and 2.2 support 
  Checkmark Icon

  Transport formats
  IPMX ready  
  Colibri codec for visually lossless transmission of compressed of media over 1G network 
  Optional JPEG XS codec license for SMPTE ST 2110-22 support (up to 2 Gbps) 
  Glass-to-glass latencies of 1ms achievable 

  Optional products
  ConductIP Media Routing Appliance to discover, route, and monitor ST 2110 or IPMX signals 
  Bracket for VESA mounting behind monitors  
  1 RU rack shelf that holds two appliances  
  Matrox NRG RPSU fault-tolerant, hot-swappable, and rack-mountable power supply 
  Crestron Module to expand existing controlled environments

• Feature Category	Feature Details
  Part Number	CIP-DRH
  Form Factor	Standalone appliance, Rack mountable: 1U, 1/2 rack (horizontal)
  Connectivity	– Video Input: 1x HDMI
  	– Video Output: 1x HDMI (zero latency pass-through in TX mode)
  	– Audio Input/Output: Up to 8 channels embedded in HDMI, Analog stereo via 1/8″ jack
  	– Network Connector: 3x RJ45 ports
  Video and Audio Processing	– Maximum Video Resolutions: 4096 x 2160 at 60p
  	– Bit Depth and Color Space: YCbCr 4:2:2 10-bit, RGB 4:4:4 8-bit
  	– Video Scaling: High Quality multi-tap 10-bit scaler
  	– Color Space Conversion: Supported
  	– HDCP Support: HDCP 1.4 and 2.2
  Encoding Formats	– Video: Uncompressed, HD and 4K up to 12 Gbps
  	– Audio: Uncompressed PCM
  	– Latency: < 1/4 frame (<4 ms)
  Network and Control	– Protocols: SMPTE ST 2110, SMPTE 2059, IPMX
  	– Redundancy: Yes (ST 2022-7)
  Physical	– Dimensions: 7.13 x 7.53 x 1.42 inches
  	– Unit Weight: 1.40 lbs
  	– Cooling: Fanless
  	– Power: 12V, max 18 Watts, Optional PSU available
  Hardware and Software	– Included: ConvertIP DRH appliance
  	– Optional: NMOS routing solution, JPEG-XS codec license
  Environmental	– Operating Conditions: 0-45°C, 20-80% humidity
  	– Storage Conditions: -40 to 70°C, 5-95% humidity
  Compliance and Warranty	– EMC/EMI Compliance: CE, FCC, ICES-003, etc.
  	– Environmental Compliance: China RoHS, EU RoHS, REACH
  	– Warranty: Three-year limited