Lindy HDBaseT Presentation System with Control Keypad | 38288

• Description
• Specifications
• Downloads

• Lindy HDBaseT Presentation System with Control Keypad | 38288

  The Lindy HDBaseT Presentation System is a powerful presentation system that allows three source devices to be connected to a remote display at up to 70 metres. This device uses three key components that create smart, autonomous presentation, education or collaboration spaces.

  An HDBaseT multi-AV transmitter with support for HDMI, VGA with audio and USB inputs which can be surface mounted. An HDBaseT receiver with dual channel analogue audio extraction, microphone input, RS232 and USB control from an interactive board, designed for discreet installation. Finally, a separate wall mounted room control panel is included to quickly switch between input devices, adjust volumes and power on or off the display.

  Both the multi-AV transmitter and control panels are both designed using PoH (power over HDBaseT) which provides power to both units alongside data using a standard Cat.6 network cable. This removes complexity from installations by allowing a single power supply to provide power to the entire system.

  4K UHD video, multi-channel & digital audio formats including DTS-X & Dolby Atmos can be transmit 40m (131.23ft) over a single HDBaseT connection allowing the receiver can be conveniently placed in a wall or ceiling cavity depending on the locations of other connected devices such as a display, projector, sub-woofers and speakers. Distances up to 70m (229.66ft) are possible with 1080p video signals.

  The inclusion of a relay port on the receiver allows room automation with devices such as a motorised projector screen or lighting to be configured to trigger once video devices are connected or disconnected.

  Using reliable HDBaseT technology, single cable installation and PoH means this system is perfectly suited for education in a classroom or training room environment. Control over this system is managed through not only the wall plate, but also from a web GUI which is freely available on any device occupying the same network, including mobile devices. This can be used to switch or set a video input, display device connection status’, determine when the relay device is used and much more.

  HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

  Please note: The Transmitter Wall Plate requires a double gang US Style backbox and the Control Wall Plate requires a single gang US style backbox, both with hole spacing of 8.33cm (3.281″)

• Category	Specification
  AV Interface	HDMI
  Interface Standard	HDMI 2.0
  Supported Bandwidth	10.2Gbps
  Maximum Distance
  – 1920×1080 @ 60Hz	70m (229.66ft)
  – 3840×2160 @ 60Hz	40m (131.23ft)
  Maximum Resolution	3840×2160 @ 30Hz 4:4:4 8bit
  HDCP Support	Pass-through
  EDID Pass Through	Pass-through
  Supported Audio	Pass-through
  IR Support	–
  CEC Support	Pass-through
  Serial Interface	–
  Transmission Protocol	HDBaseT
  Transmission Medium	1 x Cat.5e/6
  Chipset	VS210
  Special Features	–
  Connectors
  Transmitter Input	2x HDMI (Female), 1x VGA (Female), 1x USB Type B (Female), 1x 3.5mm Audio (Female)
  Transmitter Output	1x RJ45 (Female)
  Receiver Input	1x RJ45 (Female), 1x RS-232 (Terminal Block), 1x Mic In (Terminal Block)
  Receiver Output	1x HDMI (Female), 1x USB Type A (Female), 1 Relay (Terminal Block), 1x Audio Out (Terminal Block), 1x Amplifier Output (Terminal Block)
  Bi-directional Ports	–
  Power	5.5/2.1mm DC socket
  Physical Properties
  Dimensions (WxDxH)	Transmitter: 115.9×114.3×38.7mm; Receiver: 250x104x30mm; Control Plate: 70x32x115mm
  Housing Material	Metal
  Net Weight	1.227kg (2.71lb)
  Operating Temperature	0°C – 40°C (32°F – 104°F)
  Storage Temperature	-20°C – 60°C (-4°F – 140°F)
  Humidity	20-90% RH (non-condensing)
  Power Requirements	24VDC 3.75A
  Colour	Transmitter: White, Receiver: Black, Control Plate: White
  Miscellaneous
  Packaging Type	Carton Box
  Packaging Dimensions	300x275x110mm (11.81×10.83×4.33in)
  Gross Weight	2.143kg (4.72lb)
  Warranty (Years)	2
  Certifications	CE, FCC, RoHS & REACH
  Package Content
  Contents	HDBaseT Transmitter Wall Plate, Receiver, Wall Plate Control Panel, Power Supply, Terminal Blocks, Lindy QIG
  Purchasing Information
  No.	38288
  EAN	4002888382885

• Description	Downloads
  Manual	Download